DelloPlast

PP Corrugado PoliDello®

PP Corrugado PoliDello® is made from homopolymer and heterophasic copolymer polypropylene resins. Its corrugated structure combines rigidity, mechanical strength and thermal stability with low weight. The material is flexible, waterproof and resistant to moisture, heat and impact. It is also odourless, non-toxic, washable and 100% recyclable. It is the basis for much of the DelloPlast portfolio.

Products in this line · 18 products

Technical data

PP Corrugado PoliDello®: corrugated polypropylene sheet.

DimensionsMaximum width: 2100 mm. Length: any required length. Height / thickness: 1,8 mm a 5,0 mm.Maximum width: 2100 mmLengthany required lengthHeight / thickness: 1,8 a 5,0 mmInternal channels

Dimensions

Maximum width
2100 mm
Thickness
1.8 mm to 5.0 mm
Length
Sheets and reels in any length

Tolerances

Thickness
± 0.3 mm
Width
± 2.0 mm
Length
± 20 mm because the sheet shrinks along this axis
Grammage
± 5%

Thickness and grammage

Thickness and grammage

The line produces sheets from 1.8 mm. The table shows the standard combinations, starting at 2.0 mm.

Grammage (g/m²) by standard thickness (mm)
g/m²2,02,53,03,54,04,55,0
300Available combination
350Available combination
400Available combinationAvailable combination
450Available combination
500Available combinationAvailable combination
600Available combination
700Available combinationAvailable combination
800Available combinationAvailable combination
900Available combination
1000Available combinationAvailable combination
1100Available combinationAvailable combination
1200Available combinationAvailable combinationAvailable combination
1300Available combinationAvailable combination
1500Available combinationAvailable combination
2000Available combination

Physical properties

PropertyValueUnitMethod
Melt flow index (230 °C / 2.16 kg)0.9 copolymer · 1.5 homopolymerg/10 minASTM D1238
Density (23 °C)0.9g/cm³ASTM D72A

Mechanical properties

PropertyValueUnitMethod
Flexural modulus (1.3 mm/min)1200MPaASTM D790
Tensile strength at yield (50 mm/min)25MPaASTM F638
Elongation at yield (50 mm/min)10%ASTM D790
IZOD impact strength at 23 °C500J/mASTM D256
IZOD impact strength at −20 °C120J/mASTM D256
Rockwell hardness70, R scaleNot applicableASTM D785R

Thermal properties

PropertyValueUnitMethod
Vicat softening temperature (10 N / rate A)150°CASTM D1525
Heat deflection temperature (0.45 MPa)79°CASTM D648

Resistance and compliance

Thermal resistance
−20 °C to +130 °C
Chemical resistance
Grease, oils, chemicals, solvents, acids and aqueous solutions of inorganic salts
Sterilisation
Autoclave, disinfectant gas and gamma rays above 135 °C (water and steam)
Waterproofing
100%
Recyclable
100%

Colours

  • White
  • Grey
  • Black
  • Natural
  • Blue
  • Green
  • Yellow
  • Orange
  • Red

The official presentation lists nine colours. The swatches above are visual references only, as the sheet colour is defined in the order specification.

Also known as

  • Poliondas
  • Novaonda
  • Multiondas
  • PP Alveolar
  • PP Hollow Sheet

In Brazil, corrugated sheet is known as Poliondas, Novaonda, Multiondas and PP Alveolar. Abroad, it is known as PP Hollow Sheet.

Reference values obtained in testing; they may vary as specified in each standard. Source: official DelloPlast® technical presentation.

WhatsApp